Step 1 of 6

Property profile

Start With the Property

We begin with only enough information to establish which property the report describes. Your contact information is not requested until the assessment is complete.

Your Name

Complete Property Address

Why the complete address matters

Property location establishes the regional exposure context used to interpret your report, including heat, humidity, rainfall, wind and severe-weather patterns. It also identifies the climate and service area in which manufacturer installation and maintenance guidance should be considered. This screening does not independently verify storm history at the property.

Property Type

Single-Family Home Multi-Family Property Commercial Property

Approximate Age of Property

Why property type and age matter

Building components do not age on the same schedule. Property type and approximate age provide the baseline against which roof, exterior and water-management symptoms are compared later in the assessment.

I am the registered owner of this property.

Next: roofing system and service-life indicators

Step 2 of 6

Roofing system

Roof Performance Indicators

Roof material, age, inspection history and visible symptoms establish the largest portion of the exterior protection profile.

How these answers are used

The selected roof system and approximate age are compared with published manufacturer information, material characteristics and recognized inspection guidance. Reported symptoms then adjust the screening score because service life alone cannot reveal impact, moisture or attachment problems.

Roofing

What type of roof do you have?

Approximately how old is the current roof?

When was the roof last formally inspected?

What have you noticed about the roof?

Missing, cracked, broken, lifted, or visibly damaged roofing materials Worn, brittle, deteriorated, rusted, or aging roofing materials Leaks, water intrusion, staining, or signs of moisture Damaged flashing, seams, joints, vents, or roof penetrations Granules or roofing debris accumulating in gutters or downspouts Sagging, ponding water, loose sections, or other visible abnormalities I'm not sure

Step 3 of 6

Exterior envelope

Siding and Exterior Conditions

Exterior materials protect the wall assembly from impact and moisture while allowing transitions around windows, doors and corners to remain weather-tight.

Why material and symptoms are considered together

Manufacturer guidance varies by exterior system. Age establishes a service-life reference; warping, open joints, impact damage and moisture staining identify conditions that may require attention regardless of age.

Siding / Exterior

What type of siding or exterior covering does the property have?

Approximately how old is the current siding?

When was the siding / exterior last formally inspected?

What have you noticed?

Missing, broken, cracked, loose, or visibly damaged siding Warped, buckled, swollen, or deteriorated siding Peeling, rotting, splitting, or deteriorating materials Gaps, open joints, failed caulking, or separation Staining, discoloration, moisture marks, or signs of water intrusion Damage or deterioration around windows, doors, corners, or transitions I'm not sure

Step 4 of 6

Water management

Gutters and Drainage

This section examines whether roof runoff is being collected, carried and discharged away from vulnerable building components.

Why drainage belongs in a protection report

Overflow, loose attachment and poor discharge can affect fascia, siding, foundations and interior finishes. Warranty-protected gutter systems are also identified because their published service requirements may control how inspection or repair work should be performed.

Step 5 of 6

Interior cross-check

Interior Symptoms and Planned Improvements

Interior observations help distinguish ordinary age or renovation needs from symptoms that may be connected to the exterior building envelope.

What these symptoms tell us

Staining, displaced drywall and recurring moisture can be downstream evidence of roof, flashing, siding or drainage failure. Planned remodeling is also relevant because concealed conditions should be evaluated before new finishes cover them.

Step 6 of 6

Assessment complete

Your Protection Report Is Ready

Your property profile and reported symptoms are ready to be scored. Enter the best phone number and email address for this property record to generate the report and allow Umbrella to discuss any priority findings with you.

What you receive in exchange

A property-specific Protection Score from 0–100.
The age, inspection and symptom factors that influenced the result.
Priority conditions separated from routine maintenance considerations.
A recommended next step based on the information you supplied.

Phone Number

Used if your answers indicate a condition that should be clarified or professionally evaluated.

Email Address

Associates the completed assessment with your property record and provides a reliable way to follow up about the report.

Your contact information is used for this property assessment and related communication from Umbrella Roofing & Construction. It is not part of the numerical scoring calculation.

Your Umbrella Protection Score

Book a Free Inspection

How Your Protection Score Was Determined

Your Protection Score is an informational screening score based on the property information and conditions you reported. Factors may include approximate material age, time since the last reported formal inspection, and conditions you identified during the assessment.

Certain reported conditions may result in a recommendation for professional evaluation regardless of the calculated score.

Sources & Reference Information

Umbrella's screening criteria are informed by publicly available manufacturer information, published industry guidance, material characteristics, expected service-life considerations, and commonly recognized indicators of deterioration or damage.

Protection Score Disclaimer: The Umbrella Property Protection Score is an informational screening tool based on information provided by the user. It is not a professional inspection, diagnosis, engineering evaluation, structural assessment, code-compliance determination, insurance determination, or guarantee of property condition, performance, remaining service life, or value. Information provided through this assessment has not been independently verified. Actual property conditions may differ from the information provided.

Umbrella Property Protection Assessment